* The colors of the products displayed in photos may vary from one screen to another depending on their calibration.

DUKE RIM FURY STAR 6TERS FRONT

DUKE RIM FURY STAR 6TERS for All Mountain and Enduro use

Points Forts

ASYMMETRY
LATERAL RIGIDITY
INTERIOR WIDTH
DIFFERENT REAR FRONT WIDTH

Variantes disponibles

RIM DIAMETER

HOLES NUMBER

RIM PROFILE

RIM FINISH

560 g

€99.00 Tax included

132 In stock

Expected shipping date: 26/11/2024

Quantity

dealer locator

DUKE RIM FURY STAR 6TERS*
Rim for All Mountain and Enduro use. It offers excellent lateral stiffness and a very large internal width to improve the behavior of the tire. The Fury Star 6ters is the Enduro DUKE On its wheels DUKE is the exclusive owner of the production tools.. wheel. Made of a strong, lightweight alloy, this rim is perfect for your races and rugged terrain. Its wide profile facilitates the maintenance of wide tires, perfect for engaging in supports and jumps! It offers excellent lateral stiffness and a very large internal width to improve the behavior of the tire. The DUKE designed, developed, tested in FRANCE. The DUKE rim fury star has an ASYMMETRICAL profile which allows to increase the lateral stiffness of the wheel without gaining weight. this device makes it possible to further balance the tensions of the rays between the two layers and thus guarantees a better durability of the wheel.The rim's holes are off-center. this makes it possible to close more the umbrella formed by the Spokes. Thus the spokes ensure a better maintenance of the rim and the lateral stiffness of the wheel is increased. The risk of sailing is also decreased. Furthermore,this device makes it possible to further balance the tensions of the rays between the two layers and thus guarantees a better durability of the wheel. The internal width between the hooks. This give more volume to the tire and increase efficiency, comfort and grip in turns. A wide rim also means being able to use thinner and lighter tires while maintaining comfort, The softness and grip provided by a larger volume of air. Larger tires would offer even more volume of air as they are heavy and not very dynamic. The best combination tire / rim is achieved when a tire is finished mounted on a wide rim. The tire becomes larger. This combination also reduces the rolling phenomena of the tire under the rim in the changes of bearings. With a narrow rim and a wide tire, the rim floats from one side to the other of the rim without holding. Using a wide rim and a thin tire, to minimize the floating phenomenon and on the behavior and control of the bike. Inner tube or tubeless assembly.

In 2019, MTB rims profiles are differentiated as we do not ask the rims the same qualities while riding :
A front wheel must give grip, be light, stiff and handy.
A rear wheel must be more comfortable, tronger and offer more efficiency.
Thus the front and rear wheels have different profiles and lay-ups.
In collaboration with Julien Absalon, the 6TERS front and rear profiles complement each other for a greater efficiency in the trails.
Many of you are aware of different needs because you are already using different section tires at front and rear wheel.
The Duke 6TERS* concept offers a wider front rim than the rear rim for more grip and stiffness. Its weight is optimized for robustness.
The rear profile is reworked with a reduced section to improve increase the impact resistance, the constraints being much more important on the back wheel. (*6TERS = sisters = sœurs)

Technology

Hookless
This technology has been successfully used on our MTB rims since 2011. It reduces rim weight. Strength is improved. The tire is slightly bigger. Carbon rims are simpler and more economical to manufacture.
6Ters
6TERS is a concept of MTB rims differentiated between front and rear: a front wheel must maximize grip (inner width +), handling (rotational weight -) and control (lateral stiffness -). A rear wheel must provide traction, comfort (vertical stiffness-), stability (lateral stiffness +), efficiency (inside width -) and be stronger (reinforcements). Developed in collaboration with Julien Absalon (five-time world champion).
AntiBurp
Thanks to this antiburp, the tire bead is held in position at all low pressures and under all loads, so there's no risk of the bead sliding off the rim or losing pressure even when cornering hard. Two edges prevent the tire beads from sliding horizontally towards the inside of the rim. Even after a puncture, the tire stays in place on the rim
Tubeless
Our Tubeless compatible rims (UST, Tubeless Ready and Notubes), only require some Duke rim tape and a Tubeless-ready valve. They can also be used in a classic clincher set up (tyre & inner tube).
Dynamal
Dynamal is 50% stronger than 6061-T6. Unlike standard alloy blends, Dynamal is a pure alloy, enriched with magnesium-silicon and combined with a confidential metal to harden it. Compared with traditional alloys, Dynamal offers a significant increase in stress and impact resistance, without any reduction in fatigue strength.
Polyaxial-drilling
The orientation of the holes of a rim allows a perfect alignment of the nipples and spokes, which brings a better lifetime of the spokes, the rim and the wheel.
Offset
Rim offset increases lateral stiffness and wheel stability without adding weight. The rim holes are off-center, improving the spokes brace angles. By better balancing the tensions between the two spoke sides, the wheel's durability is enhanced.
Width
A wider rim provides greater comfort for the same tire cross-section, thanks to the greater volume of air in the tire. No need to inflate so much! The greater volume also enhances performance and grip. The bike's stability when cornering is also improved: a wider inner width reduces tire rolling under the rim under lateral loads. Using a wide rim improves comfort and control.