- -20%
DUKE RIM WORLD RUNNER CARBON 35 650b
LIGHTNESS - ASYMMETRY - DURABILITY - MANOEUVRABILITY - RIM WIDTH - TUBELESS COMPATIBILITY
DUKE WORLD RUNNER CARBON 35 650B
The DUKE World Runner Carbon has a profile height of 35mm. Width between 22.5mm large brackets: This gives more volume to the tires and thus improves efficiency, Comfort and grip in turns. A wide rim also means being able to use the finer and lighter tires while maintaining comfort, The softness and grip provided by a larger volume of air.
Technology
-
AntiBurp
Thanks to this antiburp, the tire bead is held in position at all low pressures and under all loads, so there's no risk of the bead sliding off the rim or losing pressure even when cornering hard. Two edges prevent the tire beads from sliding horizontally towards the inside of the rim. Even after a puncture, the tire stays in place on the rim
-
Tubeless
Our Tubeless compatible rims (UST, Tubeless Ready and Notubes), only require some Duke rim tape and a Tubeless-ready valve. They can also be used in a classic clincher set up (tyre & inner tube).
-
Polyaxial-drilling
The orientation of the holes of a rim allows a perfect alignment of the nipples and spokes, which brings a better lifetime of the spokes, the rim and the wheel.
Data sheet
- RIM MATERIAL
- CARBON
- RIM PROFILE
- SYMMETRICAL
- RIM HEIGHT (MM)
- 35
- INSIDE WIDTH (MM)
- 22.5
- OUTER WIDTH (MM)
- 29.0
- TYPE OF BRAKING
- DISC
- MAX STRAIN (N)
- 1200.0
- PRACTICE TYPE
- CX
GRAVEL BIKE
ROAD E-BIKE
TANDEM ROAD
VAE GRAVEL - NIPPLE POSITION
- EXTERNAL
- NIPPLE HEIGHT (MM)
- 14.0
- TYPE OF TYRE
- CLINCHER
TUBELESS - VALVE HEIGHT (MM)
- 51
- TAPE WIDTH (MM)
- 26.0
- MAX PRESSURE (BAR)
- 4B WITH 40MM TYRE
- ERD JANTE(S)
- 535.0
- SYSTEM MAX WEIGHT (KG)
- 120
- ETRTO (MM)
- 584.0
- MOUNTING WITH WASHERS
- NO
- POSITION
- FRONT
REAR - TYRE SECTION RANGE
- 28MM 1,10" / 56MM 2,20"
- STICKERS RANGE
- DUKE SERIE2 H
- STICKER TYPE
- H36D
- RIM / STICKERS HEIGHT
- WORLD RUNNER CARBON 35 / 36MM
- AERO OPTIMIZED TYRE SIZE
- 30MM
- WARRANTY
- 2 YEARS